某矿低铜废石综合回收利用项目职业病危害预评价

为了对某矿业有限公司低铜废石综合回收利用项目可能产生的职业病危害因素进行辨识、分析和评价，采用检查表、类比法相结合的原则对该项目的铲装、破碎、运输、筑堆等工艺进行分析评价，并利用经验法对浸出、萃取电积工艺进行分析评价。结果表明:类比工程中绝大部分粉尘、噪声检测点的浓（强）度符合国家标准；化学毒物、工频电场接触浓（强）度符合国家标准；电积车间的通风满足要求；萃取车间的事故通风能力不足。评价方法及通风计算方法对同类项目具有借鉴意义。     

Estimating the normal background rate of species extinction

A key measure of humanity's global impact is by how much it has increased species extinction rates. Familiar statements are that these are 100–1000 times pre‐human or background extinction levels. Estimating recent rates is straightforward, but establishing a background rate for comparison is not. Previous researchers chose an approximate benchmark of 1 extinction per million species per year (E/MSY). We explored disparate lines of evidence that suggest a substantially lower estimate. Fossil data yield direct estimates of extinction rates, but they are temporally coarse, mostly limited to marine hard‐bodied taxa, and generally involve genera not species. Based on these data, typical background loss is 0.01 genera per million genera per year. Molecular phylogenies are available for more taxa and ecosystems, but it is debated whether they can be used to estimate separately speciation and extinction rates. We selected data to address known concerns and used them to determine median extinction estimates from statistical distributions of probable values for terrestrial plants and animals. We then created simulations to explore effects of violating model assumptions. Finally, we compiled estimates of diversification—the difference between speciation and extinction rates for different taxa. Median estimates of extinction rates ranged from 0.023 to 0.135 E/MSY. Simulation results suggested over‐ and under‐estimation of extinction from individual phylogenies partially canceled each other out when large sets of phylogenies were analyzed. There was no evidence for recent and widespread pre‐human overall declines in diversity. This implies that average extinction rates are less than average diversification rates. Median diversification rates were 0.05–0.2 new species per million species per year. On the basis of these results, we concluded that typical rates of background extinction may be closer to 0.1 E/MSY. Thus, current extinction rates are 1,000 times higher than natural background rates of extinction and future rates are likely to be 10,000 times higher. Estimación de la Tasa Normal de Extinción de Especies     

Progress in the ecology and conservation of giant pandas

Giant panda (Ailuropoda melanoleuca) conservation is a possible success story in the making. If extinction of this iconic endangered species can be avoided, the species will become a showcase program for the Chinese government and its collaborators. We reviewed the major advancements in ecological science for the giant panda, examining how these advancements have contributed to panda conservation. Pandas’ morphological and behavioral adaptations to a diet of bamboo, which bear strong influence on movement ecology, have been well studied, providing knowledge to guide management actions ranging from reserve design to climate change mitigation. Foraging ecology has also provided essential information used in the creation of landscape models of panda habitat. Because habitat loss and fragmentation are major drivers of the panda population decline, efforts have been made to help identify core habitat areas, establish where habitat corridors are needed, and prioritize areas for protection and restoration. Thus, habitat models have provided guidance for the Chinese governments’ creation of 67 protected areas. Behavioral research has revealed a complex and efficient communication system and documented the need for protection of habitat that serves as a communication platform for bringing the sexes together for mating. Further research shows that den sites in old‐growth forests may be a limiting resource, indicating potential value in providing alternative den sites for rearing offspring. Advancements in molecular ecology have been revolutionary and have been applied to population census, determining population structure and genetic diversity, evaluating connectivity following habitat fragmentation, and understanding dispersal patterns. These advancements form a foundation for increasing the application of adaptive management approaches to move panda conservation forward more rapidly. Although the Chinese government has made great progress in setting aside protected areas, future emphasis will be improved management of pandas and their habitat.     

某电子垃圾拆解园周边农田土壤中多环芳烃的污染特征及风险评估

研究了某电子垃圾拆解园周边151个农田土壤样品中16种多环芳烃(PAHs)的污染特征和环境风险。结果表明,125个表层土壤样品中PAHs总质量浓度在149.0~2.0×104μg/kg,均值为1 805.5μg/kg,随着剖面土壤深度增加,PAHs含量总体呈递减趋势。通过来源解析,电子拆解园周围土壤中PAHs污染主要由废弃的电子电器元件的粗放燃烧和汽车尾气排放共同引起。土壤风险评估表明,7种类二噁英毒性PAHs的毒性当量(TEQPAH)在6.000×10-5~0.689pg TEQ/g,平均值为0.015pg TEQ/g;苯并(a)芘、二苯并(a,h)蒽、苯并(a)蒽、苯并(b)荧蒽、茚并(1,2,3-cd)芘致癌风险率超出百万分之一的样本比例分别为20.53%、6.62%、1.99%、2.65%、2.65%,其中采样点1、68两个点位表层土壤的苯并(b)荧蒽致癌风险率超过了万分之一。     

餐厨垃圾高温厌氧消化产沼气的试验研究

探究了温度、含固率、pH及接种率对餐厨垃圾厌氧消化产沼量的影响,并设计L9(34)正交试验进行厌氧发酵工艺优化研究。结果表明,在温度为55℃、含固率为8%(质量分数)、pH为7.00、接种率为90%(质量分数)时,厌氧发酵累积产沼量为809.0mL/g(以挥发性固体计);各影响因素对产沼量的影响大小为温度pH接种率含固率。     

广东某大型城市生活垃圾焚烧厂9种重金属的迁移特征

采集广东某大型城市生活垃圾焚烧厂一期(WI-A)和二期(WI-B)的进厂垃圾、渗滤液、飞灰、底渣和烟气样品,分析了各样品中砷、镉、钴、铬、铜、汞、镍、铅、锌共9种重金属含量,研究重金属的迁移特征。结果显示,9种重金属呈现4类不同的迁移特征,钴、铜、镍、铬主要迁移至底渣中,锌、砷、铅主要迁移至底渣和飞灰中,镉主要迁移至飞灰中,汞主要迁移至飞灰和烟气中。活性炭吸附和布袋除尘器的组合对除汞以外的重金属治理效果明显。WI-A和WI-B垃圾中的汞分别约有28%、37%随烟气排到环境中。     

城市生活垃圾处理方式生命周期评价的比较研究

生命周期评价理论与方法作为一种量化环境影响的工具,在诸多领域中得到了广泛的应用。在垃圾处理领域,生命周期评价最早在20世纪90年代得到应用。生命周期评价与城市生活垃圾处理的有效结合,将促进城市生活垃圾的减量化、资源化、无害化目标的实现。总结了生命周期评价理论与方法在城市生活垃圾处理中的应用现状。对国内不同城市生活垃圾处理方式环境影响因子进行比较分析,诸如全球变暖潜力、酸化潜力和富营养化潜力等因子。针对其目标范围定义、数据收集、评价方法的选择、结果解释及工艺改进等方面指出了目前研究的局限性和不足。并对未来城市生活垃圾处理生命周期评价的发展方向进行展望。     

城市生活垃圾和污水处理厂剩余污泥混合发酵的原料配比优化研究

以城市生活垃圾和污水处理厂的剩余污泥为混合原料,研究了混合原料的不同配比对厌氧发酵过程及产气的影响。结果表明:城市生活垃圾与剩余污泥以挥发性固体(VS)质量比为2∶1混合后,厌氧发酵效果最好,累计产气量最高,达到8 721mL,发酵后的总固体(TS)、VS、COD去除率分别达43.65%、35.98%、47.88%;各实验组在发酵过程中的pH、氨氮浓度和碱度均在合理范围内,未对厌氧发酵反应造成影响;以适当配比的城市生活垃圾和剩余污泥为混合原料,进行中温联合厌氧发酵是可行的,联合厌氧发酵可以弥补单一原料的缺陷,在一定程度上改善厌氧发酵效果。     

生活垃圾催化热解液体产物特性

为探索生活垃圾催化热解液体产物特性变化规律,选取Na2CO3、CaO、Fe2O33种催化剂,利用固定床实验、红外分析(FT-IR)进行生活垃圾热解液体产物产率和组分特性研究.结果表明,热解终温600℃无催化剂时,生活垃圾热解液产率为39.80 wt％,添加3种催化剂后热解液产率均降低;生活垃圾分别添加1％的Na2CO3和CaO后,热解油氧含量由22.49％分别降低到20.12％和18.53％,低位热值由30.30 MJ/kg分别提高到33.79和32.74 MJ/kg;无催化剂时热解油成分为脂肪类、含氧化合物及少量芳香类混合物,加催化剂后热解油中芳香类物质峰面积比例显著增加,而含氧化合物峰面积比例降低,羟基类及羧酸类含氧化合物峰面积比例明显减少,其他含氧物峰面积比例却增加;CaO催化效果较明显,生活垃圾添加1％的CaO热解油中芳香类物质峰面积比例从4.36％增加到29.46％,含氧化合物峰面积比例由49.42％降低到23.12％,其中羟基类和羧酸类化合物峰面积比例分别由34.03％和10.65％降低到0.00％和3.34％,其他含氧化合物峰面积比例由4.73％增加到19.77％.     

固相餐厨垃圾厌氧发酵特性

为了研究固相餐厨垃圾厌氧发酵产甲烷特性,对固相餐厨垃圾进行批式厌氧发酵实验,主要考察了pH、VFA、COD以及纤维素酶活的变化情况,并运用修正Gompertz模型对其产气模型进行动力学拟合.实验结果表明,缓冲溶液的添加可明显促进厌氧发酵产甲烷.在添加缓冲溶液条件下,污泥与餐厨垃圾比例为2∶1,1∶1,2∶3和1∶2时,餐厨垃圾都能很好地进行厌氧发酵产甲烷,最大产甲烷产量分别为594.66、449.74、392.93和333.36 mL/g TS.采用修正Gompertz模型分别对2∶1、1∶1、2∶3和1∶2实验组产甲烷曲线进行拟合,得到产甲烷潜力分别为567.57、437.89、381.12和305.60 mL/g TS,最大产甲烷速率分别为89.38、59.81、47.26和25.80 mL/(d·g VS).对厌氧发酵过程中纤维素酶活的变化进行了研究,结果表明,CMC酶活性在提高餐厨垃圾厌氧发酵过程中纤维素的降解起重要作用.